
Moss, weeds, algae and stains lifted from block paving, tarmac, sandstone and porcelain. Re-sanding and sealing available.
No add-ons sprung on the day. This is what every full clean includes, whatever the surface.
Moss and weed treatment before washing, so the roots don't come straight back.
Rotary surface clean at even pressure, so there are no stripes or tide marks.
Edges, steps and kerbs done by hand, plus drainage channels.
Oil and rust spot treatment on stubborn stains.
Full tidy-up. Slurry rinsed off walls, paths and cars, and drains cleared before we leave.
Kiln-dried sand brushed back into block paving joints.
Optional sealer to lock the sand in and slow regrowth.
Optional add-ons like patios, paths and garden walls cleaned on the same visit.
Too much pressure on the wrong stone does lasting damage. We adjust the pressure, nozzle and cleaner to suit what's underfoot.
High pressure with a rotary head, then re-sanded. Sealing is optional but worth it on drives over ten years old.
Lower pressure so the surface doesn't break up or lose stone. Oil stains are pre-treated first.
Soft washed with a stone-safe cleaner. High pressure strips the riven face, so we don't use it here.
Cleans up quickly. We use a non-acidic cleaner so the pointing between slabs stays intact.
Low pressure and a gentle detergent so the resin doesn't lift, haze or discolour.
Send a photo with your quote request and we'll tell you, along with the right way to clean it.
We check the surface with you, move pots and point out anything that won't fully come out, like old oil or rust.
Weed and moss treatment goes on first, then a full rotary clean of the whole surface.
Slurry is rinsed away and drains cleared. Once the surface is dry enough, sand goes back into the joints.
Sealer goes on once the paving is fully dry. You can drive on it again after 24 hours.
That's for a typical two-car block paving drive, cleaned and re-sanded. Every quote is fixed and in writing before we start.
Priced by area. A typical two-car drive is 40–50m².
Sandstone and resin take longer because they need a softer clean.
Thick moss or years of build-up means more treatment time.
Sealing is added by area. It's optional, but most clients go for it.
Steps, slopes or no outside tap can add time.
Rotary surface cleaning at the right pressure for each surface, then joints re-sanded and an optional seal to keep weeds out longer.
BEFORE
AFTERQuick form or a call. Add photos if you have them.
We reply within 1 business hour. Free site visit for larger jobs.
On the agreed day, tidy finish, all waste taken away.
Alderley Edge, Handforth, Styal, Knutsford
Wilmslow services→Prestbury, Bollington, Tytherington
Macclesfield services→Bramhall, Cheadle, Hazel Grove, Poynton
Stockport services→“[Review text from Google — driveway job]”
[Name], Wilmslow“[Review text from Google — garden clearance]”
[Name], Macclesfield“[Review text from Google — patio clean]”
[Name], BramhallNot when it's done properly. We use a rotary cleaner at the right pressure for the surface, then replace any sand that washes out of the joints.
It depends most on shade, overhanging trees and drainage. Sealing keeps it cleaner for much longer, and we'll give you an honest estimate on the quote visit.
We treat the roots before washing, and sealing hardens the sand so seeds struggle to take. A light treatment once a year keeps it clear.
Straight after cleaning and sanding. If it's been sealed, leave it 24 hours.
Most of them. Old oil that's soaked deep into the block can leave a faint shadow, and we'll tell you before we start if that's likely.
Only at the start, so we can agree what's being done. After that we just need the outside tap and access to the drive.
It's rinsed into the drains, and we clear any slurry off paths, walls and cars before we leave.
Yes. Most clients add the back patio or front path while we're set up, and it works out cheaper than booking separately.
We reply within 1 business hour.